Home > Paver > Paver Installation Materials > Polymeric Paver Sand >

Sakrete Polymeric Sand - 50Lb Bag
Sakrete Polymeric Sand - 50Lb Bag
Polymeric Pavers Sand
 
Call or Email us for a shipping quote
$34.99 will be added for each palletized or bagged material
Price Per Ton $29.99 Regional quarries near you
Inflation Fighter Sale $24.99
Savings: $5.00
Material Type: Pavers Sand
Level Of Experience Required: No experience needed for excellent results.
Typical Time Required: Man Hours will vary according to volume of stone purchased, design and specifications.


Availability:: Usually Ships in 24 to 48 Hours
Product Code: 229884PVRSANDXSAK50
Qty:

Description Material Transport Photos & Liability
 
Sakrete Polymeric Sand - 50Lb Bag
SAKRETE Paver Set Sand is a mixture of sand and special additives for paving stone joints. Engineered to resist wind, rain, freezing conditions and substrate movement without washing away.

COVERAGE:
Pail:
  • 20 to 35 sq. ft. (1.9 to 3.3 sq. m) for joints of about 1/8” wide
  • 8 to 18 sq. ft. (0.7 to 1.7 sq. m) for joints of about 3/8” wide
Bag:
  • 50 - 80 sq. ft. (4.6 to 7.4 sq. m) for joints of about 1/8” (3.1 mm)
  • 20 - 40 sq. ft. (1.9 to 3.7 sq. m) for joints of about 3/8” wide (9.3 mm)

When ordering use the Purchase Order function at checkout and enter ROCK as your payment method. This will allow you to create an order for a firm transportation quote without having to pay for it at this time. While we have posted transport rates, in many circumstances we are able to ship the order to you for less. You will be given a firm cost on the whole order within a few minutes to a few hours.
Product Specifications and Uses
Steps for Installation
  1. Pour Paver Set on clean, dry surface
  2. Sweep polymeric sand into joints, filling completely. (Maximum Width of joints = 1/2”)
  3. Compact sand in joints. (Minimum Depth of joints = 1”)
  4. Remove excess Paver Set from surface before wetting.
    This is a critical step. Failure to remove ALL Paver Set may result in staining. After sweeping the pavers clean, use a leaf blower, vacuum or other devise capable of blowing air to remove the fine dust particles. FAILURE TO COMPLETELY ELIMINATE ALL DUST MAY RESULT IN STAINING.
  5. Spray using a mist (avoid spraying into joints or flooding)
  6. Repeat spraying a minimum of 4 applications at 10-20 minute intervals..

Storage
Store in a tightly closed container off the floor in a dry place.

Share your knowledge of this product. Be the first to write a review »