Aquascape Pond Filters

Filtration is what keeps a pond clear between cleanings, and Aquascape splits it into two jobs. Skimmers pull floating debris off the surface and house the pump. BioFalls biological filters sit at the top of the waterfall and hold the media where beneficial bacteria colonise. This group carries both, plus pondless waterfall filters, wetland and bog filter vaults, add-on filters for an existing system, skimmer intake bay filters and replacement filter media.

A pond normally runs a skimmer and a biological filter as a pair, sized to the pond volume and to the pump that feeds them. Check the rated pond volume, the maximum flow and the plumbing size in the Aquascape documentation for the unit before ordering, and confirm the plumbing size matches the pipe already in the ground. Filter media, mats and brushes are consumables and are listed separately so a unit can be refreshed without replacing the housing.

Skip to results list

Filters

27 items
Column grid
Column grid

Filter

Common uses

What people in this group are usually solving for.

Surface debris

Pond skimmers that catch leaves before they sink, with a basket or net you empty by hand and a bay for the pump.

Biological filtration

BioFalls filters at the head of the waterfall, holding the media that beneficial bacteria colonize.

Pondless and wetland

Pondless waterfall filters and wetland or bog vaults for features with no open pond to skim.

Refreshing a unit

Filter mats, brushes, media bags and intake bay filters, so a working housing can be brought back without replacing it.

Aquascape Pond Filters buying guide

How to choose, what to check before you order, and how Aquascape orders ship.

Filtration is what keeps a pond clear between cleanings, and Aquascape splits it into two jobs. Skimmers pull floating debris off the surface and house the pump. BioFalls biological filters sit at the top of the waterfall and hold the media where beneficial bacteria colonize. Most ponds run both.

What size pond filter do I need?

Two ratings decide it, and both come from Aquascape's documentation for the unit rather than from our page. The first is the pond volume the filter is rated for, in gallons. The second is the maximum flow it will take, which has to be at least what your pump delivers at your lift, or water pushes through faster than the media can work on it. Size to the pond you have, not the pond you wish you had, then confirm the plumbing size matches the pipe already in the ground. Going one size up on biological capacity is the cheap insurance; going one size up on flow rating is not.

A skimmer and a biological filter work as a pair

They are not alternatives. The skimmer is mechanical: it sits at the water line, takes floating debris before it sinks and rots, and gives the pump a housing. The BioFalls is biological: it holds media with enough surface area for bacteria to convert the waste that did make it into the water. Run only a skimmer and the water stays clear of leaves but the chemistry drifts. Run only a BioFalls and the bottom fills with debris the bacteria then have to work through. The pond kits pair them for that reason.

Wetland, bog and add-on filtration

A wetland or bog filter is a gravel bed planted through, with water pushed up from underneath so the plant roots and the gravel do the filtering. It is the quietest form of filtration and the one that looks least like equipment, which is why it suits a naturalistic pond. Add-on filters are the other direction: a unit that goes onto an existing system when the pond has outgrown its filtration or the fish load has climbed. Both are listed here with their own volume and flow ratings.

Media is a consumable

Filter mats, brushes, bioballs and media bags are listed separately from the housings on purpose, because they are the part that wears rather than the part that fails. A skimmer net and a filter mat are replaced rather than repaired, and a BioFalls that has stopped keeping up often needs media before it needs a bigger unit. Rinse media in pond water rather than tap water when you clean it, since chlorinated water kills the bacteria colony that the media exists to hold.

FAQ

Match two ratings from the Aquascape documentation for the unit: the pond volume in gallons, and the maximum flow it will take. The maximum flow has to be at least what your pump delivers at your lift, and the plumbing size has to match your pipe.

It sits at the water line and pulls floating debris off the surface before it sinks and breaks down, and it houses the pump. It is mechanical filtration, and it is the half of the system you empty by hand.

The biological half. It sits at the top of the waterfall and holds media with enough surface area for beneficial bacteria to colonize, so the water is treated on every pass rather than just strained.

That pairing is how the Aquascape ecosystem approach is designed to work and it is what the pond kits are built around. One without the other leaves either the chemistry or the debris unaddressed.

Mats, brushes and nets are consumables and are replaced when they no longer rinse clean or have started to break down. Rinse them in pond water, not tap water, because chlorine kills the bacteria colony the media exists to hold.

Yes. Add-on filters are made for a system that has outgrown its filtration or gained fish. Check the rated pond volume, the maximum flow and the plumbing size against what you already have before ordering.

A planted gravel bed with water pushed up from underneath, so roots and gravel do the filtering. It is the quietest option and the one that looks least like equipment, which suits a naturalistic pond.

Not sure which one fits?

Tell us the model or the part number you are working with and we will check it before you order.

Call (800) 215-7372