Iluminación y Energía para Estanques Aquascape

La iluminación es lo que hace que un elemento de agua funcione después de que oscurece, y suele ser la mejora más económica en un estanque existente. Aquascape ofrece luminarias LED sumergibles y sobre el agua en blanco cálido, luces LED de cambio de color con sus controladores, luces dedicadas para fuente que se montan dentro de una base o tazón, y luces de senda y área para la vegetación alrededor.

El lado de energía también está aquí: transformadores de bajo voltaje dimensionados por el vataje total, divisores y cables de extensión, conexiones rápidas y los accesorios de montaje que sostienen una luminaria en el ángulo correcto. Sume el vataje de cada luminaria en un circuito antes de elegir un transformador y deje margen para luces que agregue después. Aquascape publica el voltaje, el vataje, el largo del cable y el ángulo del haz por luminaria, así que tome esos datos de su documentación, o llámenos, y le ayudamos a combinar una luminaria con un sistema existente.
Omitir para ir a lista de resultados

Filtros

31 artículos

Filtro

Usos comunes

Lo que la mayoría de los clientes de este grupo está resolviendo.

Lighting a waterfall

Submersible and above water LED fixtures aimed up into the falls, which is where the light does the most work.

Inside a fountain

Dedicated fountain lights that mount inside a basin or bowl, sized for the feature rather than for a pond.

Explorar

Around the feature

Path and area lights for the planting and walkways surrounding the water, on the same low voltage run.

Powering it

Low voltage transformers sized by total wattage, plus splitters, extension cables and quick connect fittings.

Iluminación y Energía para Estanques Aquascape guía de compra

Cómo elegir, qué revisar antes de ordenar y cómo se envían los pedidos de Aquascape.

Lighting is usually the cheapest upgrade available on a pond that already runs, and it is what makes the feature work after dark. Add up the wattage of every fixture on a run before choosing a transformer.

Add up the wattage before choosing a transformer

A low voltage transformer is rated in watts, and the total draw of every fixture on the run has to sit under that rating. Wattage is shown under Specifications where Aquascape publishes a spec table for the fixture, so the sum is straightforward once you have the figures. Leave headroom, because lighting is the thing people add to rather than finish: a transformer bought exactly to today's total means a new transformer the first time you want one more light on the path. Cable length matters as well, since a long run drops voltage, and the splitters and extension cables in this group are what keep the layout tidy.

Warm white or color changing

Warm white reads as natural and is what most people end up leaving on, because it makes wet rock and moving water look like wet rock and moving water. Color changing fixtures give you the option of something else for an evening, run off their own controller, and are the usual choice where the feature is a centerpiece for entertaining rather than a quiet corner of the yard. Both are available submersible and above water here. Mixing the two on one feature rarely looks deliberate, so pick a direction.

Where to aim a pond light

Light works on what it hits, not on the water itself, so a fixture aimed into open water mostly disappears. The useful positions are underneath and slightly in front of a waterfall so the light comes up through the falling sheet, low and across a planted edge to pick up texture, and inside a fountain bowl or basin so the column glows from within. Check the beam angle spread under Specifications where the fixture shows one: a narrow beam is for a specific target and a wide one is for washing an area.

Low voltage runs and adding later

Everything in this group is low voltage, which is why it can be retrofitted to an existing pond without an electrician trenching the yard. The transformer takes line voltage at one point and everything past it is safe to handle and to bury shallow. Voltage range, wattage, lumens and beam angle spread are shown under Specifications where Aquascape publishes them, so a new light can be matched to a system already installed. Use the quick connect fittings rather than improvised splices, since those are the joints that fail wet.

Más de Estanques y Jardines Acuáticos

Aquascape Kits de Estanque y Fuentes de Agua Aquascape Bombas de Estanque Aquascape Filtros de Estanque Aquascape Fuentes y Mini Estanques Aquascape Tratamientos de Agua Aquascape Cuidado de Plantas y Peces Aquascape Liner, Tubería e Instalación Aquascape Repuestos Aquascape

¿Necesita Ayuda?

(800) 215-7372

Preguntas Frecuentes

Add up the wattage of every fixture on the run and choose a transformer rated above that total, with headroom for lights you may add later. Wattage is shown under Specifications where the fixture lists one, and we will look it up otherwise.

Some are and some are made to sit above the water. Which one a fixture is, along with its voltage range, wattage and beam angle spread, is shown under Specifications where Aquascape publishes them, so check there rather than judging by the category.

Fixtures and transformers are listed separately in this group, and some sets include one. Check the Aquascape parts list for the set, then confirm the total wattage against the transformer you have.

Warm white reads as natural and suits wet rock and moving water. Color changing fixtures run off their own controller and suit a feature used as a centerpiece. Mixing both on one feature rarely looks deliberate.

Yes, and it is usually the cheapest upgrade available. The system is low voltage, so past the transformer nothing needs trenching or an electrician, and fixtures can be added to a run that has wattage headroom.

At something solid. Light aimed into open water disappears. Put it under and slightly in front of a waterfall so it comes up through the sheet, low across a planted edge, or inside a bowl so the feature glows from within.

With the quick connect fittings and splitters made for the system rather than improvised splices, which are the joints that fail once they are wet and buried.

¿No sabe cuál necesita?

Díganos el modelo o el número de pieza con el que está trabajando y lo verificamos antes de que haga el pedido.

Llame al (800) 215-7372