Liner, Tubería e Instalación Aquascape

Esta es la mitad enterrada de un elemento de agua. Aquascape ofrece liner de estanque EPDM y el geotextil que lo protege, tubería flexible de estanque en los diámetros comunes, toda la línea de válvulas y conexiones incluyendo conexiones de espiga y deslizantes, válvulas check, tubería para sistemas de chorro, y válvulas de autollenado de agua con sus accesorios.

Aquí también se agrupan las herramientas de instalación: espuma expansiva para cascada que obliga al agua a pasar sobre la roca en lugar de por debajo, sellador de liner e insumos de reparación, y los artículos para manejar el liner que hacen manejable una lámina grande. Mida el liner a partir de las dimensiones finales del estanque con margen para la profundidad y el traslape, y dimensione la tubería según la descarga de la bomba y no según la conexión más a la mano. Los rollos completos de liner y geotextil se envían por camión y su flete se cotiza aparte.

Omitir para ir a lista de resultados

Filtros

79 artículos
Columna de cuadrícula
Columna de cuadrícula

Filtro

Usos comunes

Lo que la mayoría de los clientes de este grupo está resolviendo.

Holding the water

EPDM pond liner with the geotextile underlayment that protects it from whatever is left in the excavation.

Moving the water

Flexible pond pipe in the common diameters, with barbed and slip fittings, valves and jet system plumbing.

Automatic top up

Autofill valves and their accessories, plus check valves that stop a pipe run draining back when the pump stops.

Making it look right

Expanding waterfall foam, liner sealant and repair supplies, the pieces that decide how the finished falls behave.

Liner, Tubería e Instalación Aquascape guía de compra

Cómo elegir, qué revisar antes de ordenar y cómo se envían los pedidos de Aquascape.

This is the buried half of a water feature: EPDM liner and the underlayment that protects it, flexible pipe, valves and fittings, and the foam and sealant that make a waterfall run over the rock instead of under it.

How much pond liner do I need?

Measure the liner off the finished pond, not off the hole. You need the length and the width of the excavation at its widest points, plus enough to go down and back up the deepest section, plus an overlap at the edge to turn up behind the coping rock. Buying short is not recoverable, so err generously and trim on site. Underlayment is measured the same way and goes down first. Full rolls of liner and underlayment ship by truck and are quoted for freight before the order is placed.

Underlayment is not optional

The geotextile underlayment sits between the soil and the liner and is what stops a root, a sharp stone or a settled point from working through the EPDM over a few seasons. It is a small fraction of the liner cost and it is the cheapest insurance in the whole build, because a puncture under two tons of rock is not a repair anybody enjoys. Lay it over a cleaned excavation with the obvious stones pulled out, overlap the seams generously, and then bring the liner in over the top of it.

Size pipe from the pump, not from the fitting

The pipe diameter should follow the pump discharge and the run length, not whichever fitting happens to be in the bucket. Undersized pipe costs flow to friction the whole time the pump runs, and on a long run to the top of a waterfall that shows up as a thinner sheet than you paid for. Flexible pond pipe is easier to route than rigid and needs fewer fittings, which is fewer places to lose head. A check valve is worth fitting where the run would otherwise drain back into the skimmer every time the pump stops.

Waterfall foam and sealant

Expanding waterfall foam is what forces water to run over the rock instead of finding a path underneath it, and it is the difference between a waterfall that looks like water on stone and one that looks like a leak. It is applied behind and between the rocks as they are set, not afterward. Liner sealant and the repair supplies in this group handle seams and punctures. Both are worth having on site during the build rather than ordering after the water is in and something is obviously wrong.

Preguntas Frecuentes

Measure the finished pond: length and width at the widest points, plus enough to go down and back up the deepest section, plus an overlap to turn up behind the edge rock. Buy generously and trim on site, because short is not recoverable.

Yes. The geotextile underlayment is what stops a root or a sharp stone working through the EPDM over a few seasons. It is a small fraction of the liner cost and the cheapest insurance in the build.

Follow the pump discharge size and the length of the run, not the nearest fitting. Undersized pipe loses flow to friction continuously, which shows up as a thinner sheet at the top of the waterfall.

It forces water over the rock instead of leaking underneath it. It goes in behind and between the rocks as they are set during the build, not afterward once the water is running.

It is worth fitting wherever the pipe run would otherwise drain back into the skimmer every time the pump stops, which both wastes the prime and can overflow the skimmer box.

A valve plumbed to a water supply that tops the pond up automatically as it evaporates, so the skimmer never runs low. The accessories for mounting and concealing them are listed here too.

EPDM is repairable with the liner sealant and repair supplies in this group. The harder part is getting to the puncture under the rock, which is why the underlayment matters more than the repair kit.

¿No sabe cuál necesita?

Díganos el modelo o el número de pieza con el que está trabajando y lo verificamos antes de que haga el pedido.

Llame al (800) 215-7372